LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transaxle) >> Floor Shift Assembly >> Inspection

Floor Shift Assembly: Inspection

WARNING: This page is about a different car, the 2008 Lexus GS 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the shift lever position switch connector.
    2. Disconnect the transmission control switch connector of the shift lock control unit assembly.
      Fig 1: Identifying Transmission Control Switch Connector
      G05288279Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3 - 7 Below 1 Ω
      Except S, "+" and "-" ↑ 10 kΩ or higher
      Press continuously "+" (Up shift) 2 - 5 Below 1 Ω
      S ↑ 10 kΩ or higher
      Press continuously "-" (Down shift) 1 - 5 Below 1 Ω
      S ↑ 10 kΩ or higher

      If the resistance value is not as specified, replace the transmission control switch.

      Fig 2: Identifying Terminals Of Transmission Control Switch Connector
      G05305178Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals