Service Data
SERVICE DATA - FRONT WHEEL ALIGNMENT
| Front wheel alignment | Vehicle height | ||
| 2WD | Front: A-B Rear: C-D |
109.6 mm (4.32 in.) 31.1 mm (1.22 in.) |
|
| 4WD | Front: A-B Rear: C-D |
108.6 mm (4.28 in.) 22.9 mm (0.90 in.) |
|
| Front wheel alignment | Toe-in (total) Rack end length difference | 0 +- 2 mm (0 +- 0.08 in.) 1.5 mm (0.059 in.) or less |
|
| Wheel angle | |||
| 2WD | Inside wheel Outside wheel: Reference |
35°41' +- 2° (35.68° +- 2°) 31 °22' (31.37°) | |
| 4WD | Inside wheel Outside wheel: Reference |
35°41' +- 2° (35.68° +- 2°) 31 °22' (31.37°) | |
| Front wheel alignment | Camber | 2WD: | -0°35' +- 45' (-0.58° +- 0.75°) |
| 4WD: | -0°35' +- 45' (-0.58° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Caster | 2WD: | 2°45' +- 45' (2.75° +- 0.75°) | |
| 4WD: | 2°30' +- 45' (2.50° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | 2WD: | 10°35' +- 45' (10.58° +- 0.75°) | |
| 4WD: | 10°35' +- 45' (10.58° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Front suspension | Lower ball joint turning torque | 3.5 N*m (36 kgf*cm, 31 in.*ibf) or less | |
| Stabilizer bar link ball joint turning torque | 2.0 N*m (20 kgf*cm, 18 in.*lbf) or less | ||
- Ground clearance of front wheel center
- Ground clearance of lower suspension arm No. 2 bush set bolt center
- Ground clearance of rear wheel center
- Ground clearance of strut rod set bolt center
SERVICE DATA - REAR WHEEL ALIGNMENT
| Rear wheel alignment</ | Toe-in (total) | 3 +- 2 mm (0.12 +- 0.08 in.) |
| Camber | ||
| 2WD | -1°10' +- 45'(-1.17° +- 0.75°) | |
| 4WD | -0°40' +- 45' (-0.67° +- 45') | |
| Right-left error | 45' (0.75°) or less | |
| Rear Suspension | Stabilizer link ball joint turning torque | 1.0 N*m (10 kgf*cm, 8.9 in.*lbf) or less |