LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Lighting) >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STOP LIGHT SWITCH 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

        Standard Resistance 

        STANDARD RESISTANCE

        Tester Connection Condition Specified Condition
        1 - 2 Switch pin released Below 1 Ω
        3 - 4 Switch pin released 10 kΩ or higher
        1 - 2 Switch pin pushed in 10 kΩ or higher
        3 - 4 Switch pin pushed in Below 1 Ω
        Fig 1: Identifying Stop Light Switch
        G04832662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the stop light switch.

scientia non olet · About LEMON Manuals