LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Lighting) >> Rear Combination Light Assembly >> Reassembly

Rear Combination Light Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL REAR TURN SIGNAL LIGHT BULB 
    1. Install the rear combination light bulb into the light socket.
      2. Fig 1: Identifying Rear Turn Signal Light Bulb
      G05113608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  2. INSTALL BACK UP LIGHT BULB 
    1. Install the rear combination light bulb into the light socket.
      2. Fig 2: Identifying Back Up Light Bulb
      G05113609Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  3. INSTALL TAIL AND STOP LIGHT BULB 
    1. Install the rear combination light bulb into the light socket.
      2. Fig 3: Identifying Tail And Stop Light Bulb
      G05113610Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  4. INSTALL REAR COMBINATION LIGHT GASKET 
    1. Install a new rear combination light gasket.
      Fig 4: Identifying Rear Combination Light Gasket
      G05113604Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals