Rear Combination Light Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR COMBINATION LIGHT GASKET
1. Remove the rear combination light gasket.
  NOTE:
  - Detach the gasket if it adheres to the body.
  - Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.
  Fig 1: Identifying Rear Combination Light Gasket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE TAIL AND STOP LIGHT BULB
1. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the rear combination light bulb from the light socket.
REMOVE BACK UP LIGHT BULB
1. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the rear combination light bulb from the light socket.
REMOVE REAR TURN SIGNAL LIGHT BULB
1. Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the rear combination light bulb from the light socket.