Seat Memory Switch: Inspection

INSPECT SEAT MEMORY SWITCH

Measure the resistance according to the value(s) in the table below.

Fig 1: Identifying Seat Memory Switch

G05141806

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

STANDARD RESISTANCE TABLE

Tester Connection	Switch Position	Specified Condition
1 (E) - 2 (MMRY)	SET switch ON (pushed)	Below 1 Ω
1 (E) - 2 (MMRY)	SET switch OFF (not pushed)	10 kΩ or higher
1 (E) - 4 (1)	SW1 switch ON (pushed)	Below 1 Ω
1 (E) - 4 (1)	SW1 switch OFF (not pushed)	10 kΩ or higher
1 (E) - 3 (2)	SW2 switch ON (pushed)	Below 1 Ω
1 (E) - 3 (2)	SW2 switch OFF (not pushed)	10 kΩ or higher

If the result is not as specified, replace the switch.