LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission) >> Output Shaft >> Disassembly

Output Shaft: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 3 SYNCHRONIZER RING 
    1. Remove the No. 3 synchronizer ring from the output shaft.
  2. REMOVE OUTPUT SHAFT CENTER BEARING 
    1. Remove the output shaft center bearing from the output shaft.
  3. REMOVE OUTPUT SHAFT FRONT BEARING 
    1. Using SST and a press, remove the output shaft front bearing.

      SST 09950-00020 

      Fig 1: Identifying Output Shaft Front Bearing
      G04046621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals