LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Hybrid Transmission - Service Information >> Hybrid Mode Select Switch >> Installation

Hybrid Mode Select Switch: Installation

  1. INSTALL HYBRID MODE SELECT SWITCH 
    1. Engage the 2 claws and install the hybrid mode select switch to the console box plate.
      Fig 1: Identifying Claws On Hybrid Mode Select Switch
      G05305186Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CONSOLE BOX PLATE  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  5. INSTALL UPPER CONSOLE PANEL ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT CONSOLE UPPER PANEL GARNISH  (See INSTALLATION )
  7. INSTALL SHIFT LEVER KNOB (See  INSTALLATION   ) 
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  9. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 
  11. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).
      NOTE: Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.
scientia non olet · About LEMON Manuals