Battery Fuse: Installation

INSTALL ELECTRIC VEHICLE FUSE
1. Install the electric vehicle fuse with the 2 bolts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 1: Locating Electric Vehicle Fuse Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the service plug grip cover with the 2 craws.
  
  Fig 2: Installing Service Plug Grip Cover With Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SERVICE PLUG GRIP (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL BATTERY SERVICE HOLE COVER LH (See INSTALLATION )
PERFORM INITIALIZATION
1. Perform initialization procedure (see INITIALIZATION (2006/02-2006/07) ).
  NOTE: Some vehicle systems require initialization after reconnecting the cable to the negative battery terminal.