Fog Light Assembly: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
  Fig 1: Adjusting Fog Light Aim

  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. INSTALL FOG LIGHT BULB 
   1. Install the fog light bulb.
   2. Turn the fog light bulb in the direction indicated by the arrow and install it.
      Fig 2: Identifying Fog Light Bulb

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FOG LIGHT ASSEMBLY 
   1. Attach the 2 claws and install the fog light.
   2. Install the bolt.
      Fig 3: Identifying Fog Light Assembly Bolts And Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL FRONT BUMPER COVER  (See INSTALLATION )
4. INSTALL FRONT FENDER LINER LH  (See INSTALLATION )
5. INSTALL FRONT FENDER LINER RH  (See INSTALLATION )
6. INSTALL ENGINE UNDER COVER  (See INSTALLATION )
7. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
9. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
10. ADJUST FOG LIGHT AIM 
    1. Adjust the fog light aim (see ADJUSTMENT  ).