Rear Axle Hub Bolt: Replacement

REMOVE REAR WHEEL
SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (See REMOVAL )
REMOVE REAR DISC (See DISASSEMBLY )
REMOVE REAR AXLE HUB BOLT
1. Using SST, and remove the rear axle hub bolt.
  SST 09628-10011
  
  NOTE: Do not damage the threads of the hub bolts.
  
  Fig 1: Removing Rear Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR AXLE HUB BOLT
1. Install a washer and nut to a new bolt as shown in the illustration.
  
  Fig 2: Installing Rear Axle Hub Bolt Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screw driver or an equivalent to hold the hub & bearing assembly, install the rear axle hub bolt by tightening the nut.
  NOTE: Do not damage the threads of the hub bolts.
INSTALL REAR DISC (See REASSEMBLY )
ADJUST PARKING BRAKE SHOE CLEARANCE (See PARKING BRAKE SYSTEM )
INSTALL REAR DISC BRAKE CALIPER ASSEMBLY (See INSTALLATION )
INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)