LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Electrical >> Starter >> Starting >> Starter Cut Relay >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT STARTER CUT RELAY 
    1. Using an ohmmeter, measure the resistance between each terminal.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      Below 1 Ω (when battery voltage is applied to terminals 1 and 2)
      Fig 1: Identifying Starter Cut Relay Connector Terminals
      G04975703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the starter cut relay.

scientia non olet · About LEMON Manuals