DTC C15C3/75 Brake System Control Module Malfunction: Description
WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
The steering control ECU detects a vehicle speed error by receiving an error signal from the skid control ECU via CAN communication.
If the steering control ECU detects this error signal, it will turn the master warning light on, store this DTC, and stop VGRS operation.
DTC DETECTING CONDITION CHART
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| C15C3/75 | The steering control ECU receives a vehicle speed error signal via CAN communication. |
|
- CHECK DTC
- Check for DTCs in the skid control ECU (See DATA LIST / ACTIVE TEST
).
OK:
DTC is not output.
NG : REPAIR CIRCUIT INDICATED BY DTC OUTPUT
OK : GO TO NEXT STEP
- Check for DTCs in the skid control ECU (See DATA LIST / ACTIVE TEST
).
- CHECK DTC
- Check for DTCs in the CAN communication system (See GATEWAY ECU COMMUNICATION STOP MODE
).
Result
RESULT SPECIFICATIONResult Proceed to DTC is not output. A DTC is output. B
NG : REPAIR CIRCUIT INDICATED BY DTC OUTPUT
OK : REPLACE STEERING CONTROL ECU
- Check for DTCs in the CAN communication system (See GATEWAY ECU COMMUNICATION STOP MODE
).