Ignition Or Starter Switch ASSY: Replacement

WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The installation procedures are the removal procedures in reverse order.

REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 1 (See REPLACEMENT )
REMOVE SWITCH BASE HOLE COVER (See REPLACEMENT )
REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY NO. 1 (See REPLACEMENT )
REMOVE IGNITION OR STARTER SWITCH ASSY
1. Disconnect the ignition switch connector and unlock warning switch connector.
2. Remove the clamp.
3. Remove the 2 screws and ignition switch.
  
  Fig 1: Locating Ignition Switch Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002