Section 583 (Air Conditioning): Condenser: Reassembly

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COOLER DRYER
1. Using needle nose pliers, install the cooler dryer.
  
  Fig 1: Identifying Cooler Dryer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a new O-ring to the cap.
3. Sufficiently apply compressor oil to the fitting surfaces of the 6-ring and the cap.
  Compressor oil:
  
  ND-OIL 8 or equivalent
  
  Fig 2: Locating O-ring On Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a 14 mm (0.55 in.) hexagon wrench, install the cap to the cooler condenser assembly.
  Torque: 2.9 N*m (30 kgf*cm, 25 in.*lbf)
  
  Fig 3: Identifying Cooler Condenser Core
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002