Section 583 (Air Conditioning): Condenser: Disassembly

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE COOLER DRYER
1. Using a 14 mm (0.55 in.) hexagon wrench, remove the cap and filter from the modulator.
  
  Fig 1: Identifying Cooler Condenser Core
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the O-ring from the cap.
  
  Fig 2: Locating O-ring And Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using needle nose pliers, remove the cooler dryer.
  
  Fig 3: Identifying Cooler Dryer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002