Solar Sensor: Inspection

Using a screwdriver, pull out the sensor, then disconnect the connector.

Fig 1: Identifying Solar Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. HINT:
2. Tape the screwdriver tip before use.

1. Cover the sensor with a cloth, check that the no continuity exists between terminals.

   If continuity exists, replace the sensor.

   Fig 2: Inspecting Solar Sensor Continuity

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the cloth from the sensor and subject the sensor to electric light, check that continuity exists between terminals.

   If no continuity exists, replace the sensor.

   Fig 3: Subjecting Sensor To Electric Light, Checking That Continuity Exists

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Connect the connector and install the solar sensor.

Fig 4: Installing Solar Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002