LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 300 >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Thermostat >> Installation

Cooling System (Mechanical): Thermostat: Installation

  1. PLACE THERMOSTAT IN WATER INLET. 
    1. Install a new gasket to the thermostat.
    2. Align the jiggle valve of the thermostat with the protrusion of the water inlet.
      3. Fig 1: Aligning Jiggle Valve With Protrusion
      G03149739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL WATER INLET.  Install the water inlet with the 2 nuts.
    1. Torque:  9.0 N.m (90 kgf.cm, 80 in. lbf)
  3. FILL WITH ENGINE COOLANT. 
  4. START ENGINE AND CHECK FOR COOLANT LEAKS. 
scientia non olet · About LEMON Manuals