LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> LS 400 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical >> Engine Oiling >> Oil Pump >> Installation

Oil Pump: Installation

  1. Ensure sealing surfaces are clean. Install NEW "O" ring on cylinder block. Apply sealant on oil pump body sealing surface.
  2. Install oil pump. Ensure teeth on drive rotor engage with teeth on crankshaft. Install bolts. Ensure proper bolts are installed in specified areas. See Fig 1. Tighten all bolts to specification. See TORQUE SPECIFICATIONS .
  3. To install remaining components, reverse removal procedure. Ensure proper oil pan installation procedure is used. See OIL PAN  under REMOVAL & INSTALLATION. Fill engine with oil.
Fig 1: Identifying Oil Pump Bolt Location
G00006505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals