LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Restraints Control Module (RCM) >> Installation

Restraints Control Module (RCM): Installation

WARNING: This page is about a different car, the 2010 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the RCM.
    • Tighten the Torx screws to 10 Nm (7 lb.ft).
    • Connect the electrical connectors.
    • Position the carpet.
  2. Install the floor console. Refer to Floor Console .
  3. Connect the battery ground cable. Refer to Specifications .
  4. Using T4, initiate a new RCM.
scientia non olet · About LEMON Manuals