Driver Controls

The driver controls are located in the center console. They consist of an up and down height control switch, an inhibit switch and a height setting indicator. The height control switch is a press and release rocker switch. EAS system will not respond until switch is released.

When height control switch is pressed, a ride height indicator light will illuminate. These indicator lights include high, standard, low and access. Extended ride height cannot be selected by the driver. When the inhibit switch is activated, a telltale light will illuminate and automatic height changes between standard ride height and low ride height are disabled. An instrument pack warning light will illuminate during vehicle operation when high profile is set or flash when extended profile is set. This light will also illuminate when an EAS system fault is detected. All lights will illuminate as a bulb check when ignition is turned on and until 2 seconds after engine is started.