Input Gear/Bearing: Disassembly

Make alignment marks between cover plate/bearing housing and main casing. See Fig 1 .
Remove 5 bolts and stud nut securing cover/bearing housing to main casing. Remove cover and bearing housing. See Fig 1 .
Remove input gear assembly. See Fig 2 .
Remove and discard oil seal from main casing. See Fig 3 .
Drift out bearing track from main casing. See Fig 4 .
Drift out bearing track from housing and collect selective shim. See Fig 5 .
Position tool LRT-99-002 to vice. See Fig 6 .
Assemble tool LRT-41-003 to bearing, position input gear to hand press and remove bearing. See Fig 6 .
Repeat procedure for remaining bearing.

Fig 1: Removing Bearing Housing Cover Plate

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 2: Removing Input Gear Assembly

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 3: Removing Main Casing Oil Seal

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 4: Removing Main Casing Bearing Track

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 5: Removing Housing Bearing Track & Selective Shim

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 6: Removing Input Gear Bearing

Courtesy of LAND ROVER NORTH AMERICA, INC.