ABS Modulator

The SLABS ECU provides outputs to and receives inputs from the ABS modulator through connector C0506.

The inputs and outputs are as follows:

• Output from SLABS ECU pin C0506-1 to ABS modulator pin C0501-1 on an SW wire.
• Output from SLABS ECU pin C0506-2 to ABS modulator pin C0501-2 on an SR wire.
• Input from ABS modulator pin C0501-8 to SLABS ECU pin C0506-3 on a BS wire.
• Output from SLABS ECU pin C0506-4 to ABS modulator pin C0501-13 on an SG wire.
• Output from SLABS ECU pin C0506-5 to ABS modulator pin C0501-12 on an SU wire.
• Input from ABS modulator pin C0501-9 to SLABS ECU pin C0506-6 on a YG wire.
• Output from SLABS ECU pin C0506-7 to ABS modulator pin C0501-5 on an SY wire.
• Output from SLABS ECU pin C0506-8 to ABS modulator pin C0501-4 on an SN wire.
• Output from SLABS ECU pin C0506-10 to ABS modulator pin C0501-10 on an SP wire.
• Output from SLABS ECU pin C0506-11 to ABS modulator pin C0501-11 on an SK wire.

The ABS modulator (D124) is connected on a B wire to earth eyelet connector C0561-1.