LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Recirculating Ball >> Removal & Installation >> Drop Arm >> Removal

Drop Arm: Removal

  1. Place vehicle on a hoist, or support front axle on axle stands.
  2. Disconnect drag link from drop arm ball joint using taper joint extractor tool (LRT 57 018), or equivalent. See Figure .
  3. Remove drop arm using special tool (LRT 57 012), see SPECIAL TOOLS  . Loosen drop arm securing nut, but do not remove before using extractor. See Figure .
scientia non olet · About LEMON Manuals