LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Heater And A/C Control Unit) >> Heater Control Unit >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box housing.

    (Refer to Body - " GLOVE BOX HOUSING  ") 

  3. Remove the shower duct (A) after loosening the screw.
    G12799160Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the heater control unit connectors (A).
  5. Remove the heater control unit (B) after loosening the screws.
    G12799161Courtesy of KIA MOTORS AMERICA, INC.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals