Check The Power Source Circuit
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the 38pin connector from the ABS HECU control module.
- Turn the ignition switch ON, measure the voltage between terminal 6 of the ABS control module harness side connector and body ground.
Specification: approximately B+
- Is the voltage within specification?
YES
- Check the ground circuit.
NO
- Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ABS control module. Repair if necessary.