LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat Assembly >> Front Seat Assembly >> Repair Procedures >> Replacement

Repair Procedures: Replacement

NOTE: Be careful as the seat back may touch peripheral components such as the sunvisor if it is folded forward with its headrest and seat adjusted high and the seat moved forward.
  1. After loosening the mounting bolts, remove the front seat assembly.

    Tightening torque: 

    49.0 - 63.7 N.m (5..0 - 6.5 Kgf.m, 36.2 - 47.0 lb.ft)

    [Front] 

    G12796122Courtesy of KIA MOTORS AMERICA, INC.

    [Rear] 

    G12796123Courtesy of KIA MOTORS AMERICA, INC.
  2. Disconnect the main connector (A), side airbag connector (B), and front seat belt buckle connector (C).

    [Driver Side] 

    G12796124Courtesy of KIA MOTORS AMERICA, INC.

    [Passenger Side] 

    G12796125Courtesy of KIA MOTORS AMERICA, INC.
  3. Install in the reverse order of removal.

    Information 

    SEAT MOUNTING BOLT INSTALLATION PROCEDURE

    • Set the seat into its rearmost position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.
    • Set the seat into its foremost position. Check that each slide is locked, and then tighten the rear mounting bolt completely.
    • Set the seat into its rearmost position. Tighten the front mounting bolt completely.
    • Check that the seat operates to and fro smoothy and the locking portion locks properly.
scientia non olet · About LEMON Manuals