Repair Procedures: Replacement

WARNING: This page is about a different car, the 2019 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Recover the refrigerant with a recovery/recycling/charging station.
CAUTION:
- Do not use the same A/C recovery/charging station as conventional belt-driven compressors.
- Since the electric compressor uses high-voltage, POE oil with high resistivity should be used.
- If PAG oil mixes into the POE oil of the system, dielectric breakdown may occur due to decreased volumetric resistivity and the A/C compressor may not work.
Drain the coolant.
(Refer to Traction Motor System - "COOLANT ")
Disconnect the negative (-) battery terminal.
Remove the reservoir tank.
(Refer to Traction Motor System - "RESERVOIR ")
Separate the refrigerant line (A) after loosening the mounting bolt.

Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
- Cap the open fittings immediately to keep moisture or dirt out of the system.

Separate the refrigerant line (A) after loosening nut and then remove the chiller coolant hose (B).

NOTE:

Cap the open fittings immediately to keep moisture or dirt out of the system.

Courtesy of KIA MOTORS AMERICA, INC.

Remove the chiller (A) after loosening the mounting bolts.

Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
CAUTION:
- Do not use the same A/C recovery/charging station as conventional belt-driven compressors.
- Since the electric compressor uses high-voltage, POE oil with high resistivity should be used.
- If PAG oil mixes into the POE oil of the system, dielectric breakdown may occur due to decreased volumetric resistivity and the A/C compressor may not work.