LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (4WD Control System Diagnosis) >> DTC P1836: Bleed Pressure Line Test Error >> Component Inspection >> Vehicle S/W Management >> Variant Coding Procedure

Variant Coding Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Ignition switch "OFF"
  2. Connect GDS to Data Link Connector (DLC).
  3. Ignition switch "ON"
  4. Select "Vehicle S/W Management"  on GDS.
  5. Perform "Clutch Learning Reset" in "Vehicle S/W Management"  with GDS.
  6. Clear any DTCs stored in the system with GDS.
Fig 1: Screen Display - Vehicle S/W Management List
G12182065Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Screen Display - Clutch Learning Read 1
G12182066Courtesy of KIA MOTORS AMERICA, INC.
Fig 3: Screen Display - Clutch Learning Read 2
G12182067Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals