LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Heater System) >> Temperature Control Actuator >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the driver's side shower duct (A) after loosening the screw.
    Fig 1: Removing Driver Side Shower Duct Screw
    G12238198Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.
    Fig 2: Removing Temperature Control Actuator Mounting Screws
    G12238199Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals