LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Blower System (HEV)) >> Intake Actuator >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    (Refer to CRASH PAD )

  3. Disconnect the Intake actuator connector (A)
  4. Loosen the mounting screw and then remove the intake actuator (B).
    Fig 1: Loosening Intake Actuator Mounting Screw
    G11818556Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals