Repair Procedures: Installation

Install in the reverse order of removal.
CAUTION: After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
NOTE:
- Adding Automatic Transaxle Fluid(ATF).
  (Refer to Hydraulic System - "Fluid ")
- Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
  (Refer to Automatic Transaxle Control System - "REPAIR PROCEDURES ")
- Replace the gasket (A) before reinstalling the valve body cover.
Fig 1: Locate Gasket
Courtesy of KIA MOTORS AMERICA, INC.