LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump >> Repair procedures >> Inspection >> Fuel Sender

Fuel Sender

  1. Turn the ignition switch OFF, and then remove battery (-) cable.
  2. Remove the fuel pump assembly.
  3. Using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level.
    Fig 1: Identifying Fuel Pump Connector (A) Terminals 1 & 3
    G00571088Courtesy of KIA MOTORS AMERICA, INC.
    Pin No. Description
    1 Fuel sender signal
    2 Fuel pump motor (+)
    3 Fuel sender ground
    4 Fuel pump motor ground
  4. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
scientia non olet · About LEMON Manuals