Removal and Installation

(Refer to Intake And Exhaust System - "INTAKE MANIFOLD ")

(Refer to Engine Control/Fuel System - "DELIVERY PIPE ")

Tightening torque: 

14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m, 10.8 ~ 15.9 lb-ft)

Fig 1: Locating Oil Pressure Switch

Courtesy of KIA MOTORS AMERICA, INC.

NOTE:

• When removing and installing the oil pressure switch, use a deep socket as shown in illustration below.
  • 3/8" drive deep socket (24mm) with the wall thin and the length less than 75mm

Fig 2: 24 MM Deep Socket

Courtesy of KIA MOTORS AMERICA, INC.

[Arrangement of tools for removing oil pressure switch] 

Fig 3: Tools Needed For Procedure

Courtesy of KIA MOTORS AMERICA, INC.

[Installation order for tools] 

1. Insert a 24mm deep socket (A) to the oil pressure switch.
   Fig 4: Inserting Deep Socket To Oil Pressure Switch

   Courtesy of KIA MOTORS AMERICA, INC.
2. After connecting other tools as arranged in the above image, insert the tools (A) to socket.

Fig 5: Inserting Tools To Socket

Courtesy of KIA MOTORS AMERICA, INC.

Seal lock:  THREE BOND 2403

Thickness:  0.2 ~ 0.4 mm (0.008 ~ 0.016 in.)

Fig 6: Checking Seal Lock Thickness

Courtesy of KIA MOTORS AMERICA, INC.