Repair procedures: Removal: Monitor

Remove the crash pad center fascia panel.
(Refer to the BE - "CENTER FASCIA PANEL REPLACEMENT ")
Using the flat driver or remover, remove the center fascia lower panel (A).

Fig 1: Removing Center Fascia Lower Panel
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (B) and in-car hose (A).

Fig 2: Disconnecting Connector And In-Car Hose
Courtesy of KIA MOTORS AMERICA, INC.
Using the flat driver or remover, remove the crash pad garnish [RH] (A).

Fig 3: Removing Crash Pad Garnish (RH)
Courtesy of KIA MOTORS AMERICA, INC.
Using the flat driver or remover, remove the crash pad center garnish (A).

Fig 4: Removing Crash Pad Center Garnish
Courtesy of KIA MOTORS AMERICA, INC.
Using the flat driver or remover, remove the left crash pad side cover (A).

Fig 5: Removing Left Crash Pad Side Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the crash pad garnish [LH] (A) after loosening the mounting screw.

Fig 6: Removing Crash Pad Garnish (LH) Mounting Screw
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cluster fascia panel (A) after loosening the mounting screws.

Fig 7: Removing Cluster Fascia Panel Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Remove the center fascia upper panel (A) after loosening the mounting screws.

Fig 8: Removing Center Fascia Upper Panel Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Remove the monitor (A) after loosening the mounting screws.

Fig 9: Removing Monitor Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the monitor connectors (A).

Fig 10: Disconnecting Monitor Connectors
Courtesy of KIA MOTORS AMERICA, INC.