LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Sedona EX >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - General Information >> Power Train >> Spark Plug >> Repair procedures >> Removal

Repair procedures: Removal

NOTE:
  • Be careful that no contaminates enter into spark plug holes.
  • Use the spark plug wrench (A) to prevent the damage on the spark plug.
Fig 1: Removing Spark Plug Using Spark Plug Wrench
G10648138Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
  • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Fig 2: Lock Pin And Clip
G10648139Courtesy of KIA MOTORS AMERICA, INC.

Ignition coil (Cylinder #1) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 3: Ignition Coil Connector And Mounting Bolt - Cylinder #1 (Bank 1)
    G10648140Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition coil (Cylinder #2) [Bank 2] 

  1. Turn the ignition switch off and disconnect the battery negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 4: Ignition Coil Connector And Mounting Bolt - Cylinder #2 (Bank 2)
    G10648141Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition coil (Cylinder #3) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 5: Ignition Coil Connector And Mounting Bolt - Cylinder #3 (Bank 1)
    G10648142Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition coil (Cylinder #4) [Bank 2] 

  1. Turn the ignition switch off and disconnect the battery negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 6: Ignition Coil Connector And Mounting Bolt - Cylinder #4 (Bank 2)
    G10648143Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition coil (Cylinder #5) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 7: Ignition Coil Connector And Mounting Bolt - Cylinder #5 (Bank 1)
    G10648144Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition coil (Cylinder #6) [Bank 2] 

  1. Turn the ignition switch off and disconnect the battery negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 8: Ignition Coil Connector And Mounting Bolt - Cylinder #6 (Bank 2)
    G10648145Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.
scientia non olet · About LEMON Manuals