LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Blower System) >> Blower Unit >> Repair procedures >> Replacement

Repair procedures: Replacement

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad. (Refer to CRASH PAD )
  3. Remove the cowl cross bar assembly. (Refer to CRASH PAD )
  4. Remove the heater and blower unit (Refer to CRASH PAD )
  5. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws.
    Fig 1: Identifying Blower Unit On Heater Unit (1 Of 2)
    G06875505Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Identifying Blower Unit On Heater Unit (2 Of 2)
    G06875506Courtesy of HYUNDAI MOTOR CO.
    NOTE: Make sure that there is no air leaking out of the blower and duct joints.
  6. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals