LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Control Panel >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the ashtray (A).
    Fig 1: Identifying Ashtray
    G06829848Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the center facial lower panel (B) by pulling it using a screw driver (-) after loosening a screw (A). Avoid damaging retaining clips.
    Fig 2: Identifying Center Facia Lower Panel
    G06829849Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connectors (A) from the center facia.
    Fig 3: Identifying Center Facia Connector
    G06829850Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the heater & A/C controller temperature control cable (A).
    Fig 4: Identifying Heater & A/C Controller Temperature Control Cable
    G06829851Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the heater & A/C controller (A) after loosening 4 screws.
    Fig 5: Identifying Heater & A/C Controller
    G06829852Courtesy of KIA MOTORS AMERICA, INC.
  7. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals