LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Steering >> Steering Column And Shaft >> Steering Column-Shaft >> Repair procedures >> Disassembly >> Key Lock Assembly

Key Lock Assembly

  1. Make a groove on head of the special bolt (A) by using a punch.
    Fig 1: Identifying Special Bolt
    G06843862Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the key lock assembly (A) from the steering column (B) by loosing special bolts.
    Fig 2: Identifying Steering Column
    G06843863Courtesy of KIA MOTORS AMERICA, INC.
  3. When reassembling the key lock assembly, loosely install new special bolts to the steering column shaft.
    Fig 3: Installing Special Bolts
    G06843864Courtesy of KIA MOTORS AMERICA, INC.
  4. Tighten the special bolt until its head is cut off.
    Fig 4: Tightening Special Bolt
    G06843865Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals