LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Amanti >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Rear Wheel Speed Sensor >> Repair Procedure >> Inspection

Repair Procedure: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 100Ω resistor must be used as shown. See Fig 1.
    Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G06406785Courtesy of KIA MOTORS AMERICA, INC.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown. See Fig 2.
Fig 2: Output Voltage Graph
G06406786Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals