LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Module (Driver Side) >> Air Bag Module And Clock Spring >> Removal

Air Bag Module And Clock Spring: Removal

  1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
  2. Remove the airbag module mounting bolts.
    Fig 1: Locating Airbag Module Mounting Bolts
    G04882757Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the horn connector (A).
    Fig 2: Identifying Horn Connector And Connector Locking Pin
    G04882758Courtesy of KIA MOTORS AMERICA, INC.
  4. Release the connector locking pin (B), then disconnect the driver airbag module connector (C).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
  5. Remove the steering wheel and steering wheel column cover (Refer to STEERING COLUMN / SHAFT ).
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Identifying Clock Spring And Horn Connector
    G04882759Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals