Cruise Control Systems: Troubleshooting: Pre-Troubleshooting

Before starting troubleshooting, inspect each of the following. If there is an abnormality, carry out a repair.

1. Check if the installation and connection route of the cable is normal.
2. Check if there is no excessive play or tension in each cable.
3. Check that the installation of the accelerator cable is correct, and that the cables and links are securely connected.
4. Check that the accelerator pedal moves smoothly.
5. Adjust the cable so there is not excessive tension or excessive play on the accelerator cable.
6. Check that the CCM (Cruise Control Module), cruise main and control switch, and the connector of each cancel switch are connected securely.