DTC 55: Driver Module Short
WARNING: This page is about a different car, the 2003 Kia Spectra. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE under REMOVAL & INSTALLATION. Disconnect ADU connector. Measure resistance between upper clockspring connector terminal No. 2 and terminal No. 3. See WIRING DIAGRAMS . If resistance is less than infinite, go to next step. If resistance is infinite, replace driver-side air bag module.
- Disconnect lower clockspring connector. Measure resistance between lower clockspring connector terminal No. 2 (Yellow/Red wire) and terminal No. 3 (Yellow/Black wire). If resistance is not infinite, replace wire harness between ADU and clockspring. If resistance is infinite, replace clockspring. See CLOCKSPRING under REMOVAL & INSTALLATION.