LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Message Center (Service Information)) >> Sensor, Ambient Temperature >> Installation

Sensor, Ambient Temperature: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0145862Courtesy of CHRYSLER GROUP, LLC
  1. Position the ambient temperature sensor (2) in the vehicle and install the push pin type retainer (1).
  2. Connect the wire harness connector (3) to the ambient temperature sensor.
  3. Install the radiator grille assembly. Refer to GRILLE, INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals