LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Crankshaft Position >> Removal And Installation >> 1.6L Diesel >> Installation

1.6L Diesel: Installation

  1. Install the Crankshaft Position (CKP) sensor and tighten the bolt (1) to the proper specification.
  2. Connect the CKP sensor wire harness connector.
  3. Install the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
GC0166207Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals