LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Cooling System) >> Engine >> Radiator, Engine Cooling >> Removal >> Gas

Radiator, Engine Cooling: Removal: Gas

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system. Refer to DRAINING .
  3. Remove the pressurized coolant bottle. Refer to BOTTLE, PRESSURIZED COOLANT, REMOVAL .
    GC0160580Courtesy of CHRYSLER GROUP, LLC
  4. Remove the front bumper center grill (2).
    GC0160611Courtesy of CHRYSLER GROUP, LLC
  5. Remove the center grill support frame (1).
    GC0160276Courtesy of CHRYSLER GROUP, LLC
  6. If equipped, remove the power steering cooler (1) fasteners and position aside.
  7. Remove the radiator crossmember support. Refer to CROSSMEMBER, RADIATOR, REMOVAL .
    GC0160574Courtesy of CHRYSLER GROUP, LLC
  8. Remove the air shutter (1).
  9. Remove the cooling fans. Refer to FAN, COOLING, REMOVAL .
  10. Separate the condenser from the radiator.
    GC0160520Courtesy of CHRYSLER GROUP, LLC
  11. Remove the bolt (2) and the radiator mounts (1).
  12. If equipped, release the tabs that secure the transmission cooler, and separate the cooler from the radiator.
  13. Lift up and remove the radiator (3) the vehicle.
scientia non olet · About LEMON Manuals