LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Renegade Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Throttle Body >> Removal And Installation >> 2.4L >> Installation

Removal And Installation: 2.4L: Installation

  1. Install a new gasket on the inlet plenum.
  2. Install the throttle body, positioning it correctly on the centering pin.
  3. Install the throttle body fasteners and tighten to the proper specification. Refer to FUEL INJECTION, SPECIFICATIONS .
  4. Install the throttle body reinforcement bracket and tighten the fastener to the proper specification. Refer to FUEL INJECTION, SPECIFICATIONS .
  5. Connect the electrical connection of the throttle body.
  6. Install the hose for the vacuum brake booster, engage it in its clip and connect the quick coupling.
  7. Install the tubing from the air filter to the throttle body, and securely tighten the clamp.
  8. Connect the electrical connection of the air temperature sensor.
  9. Connect the air hose from the filter to the throttle body, and securely tighten its strap.
  10. Connect the quick coupling of engine oil vapor hose.
  11. Securely tighten the air hose to the throttle body filter fastener.
  12. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals