Transmission Control Module: Installation: Installation

Fig 1: TCM Out

Courtesy of CHRYSLER GROUP, LLC

1. Install the TCM mounting bracket holes (1) over the two studs on the bulkhead.
   Fig 2: TCM Unplugged

   Courtesy of CHRYSLER GROUP, LLC
2. Install the two nuts (4) to mounting studs (1) on the bulkhead.
3. Position the body harness aside to gain access to the mounting studs.
4. Tighten nuts (4) to 15 N.m (133 in. lbs.).
5. Plug in electrical connectors (2) to TCM (3).
6. If a new TCM is installed a learn procedure must be performed.