Battery, AGM: Installation: Installation

WARNING:

Wear a suitable pair of rubber gloves when removing a battery by hand. Safety glasses should also be worn. If the battery is cracked or leaking, the electrolyte can burn the skin and eyes.

Fig 1: Battery Hold Down Retainers & Battery Hold Down

Courtesy of CHRYSLER GROUP, LLC

Install the battery into the vehicle.
Install the battery hold down (1) into position and install the battery hold down retainers (2).
Tighten to 20 N.m (15 Ft. Lbs.).

Fig 2: Battery Thermal Blanket
Courtesy of CHRYSLER GROUP, LLC
Install the battery thermal blanket.

Fig 3: Negative Battery Cable
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Negative battery terminal shown in illustration, positive terminal similar.
Position back the positive battery cable (2) and connect to the battery (1).
Position back the negative battery cable and connect to the battery.

Fig 4: Lid To The Battery Bin
Courtesy of CHRYSLER GROUP, LLC
Install the battery cover (1).
Move the seat back to its original position.