LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Starting System (Service Information)) >> Starting Information >> Diagnosis And Testing >> Starting System >> Testing >> Control Circuit Testing

Control Circuit Testing

WARNING: This page is about a different car, the 2007 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.

The starter control circuit components should be tested in the order in which they are listed, as follows:

  1. Starter Relay  - Refer to RELAY - STARTER MOTOR . The starter relay is located within the TIPM (Totally Integrated Power Module). Refer to "*NO CRANK CONDITION " .
  2. Starter Solenoid  - Refer to STARTER MOTOR .
  3. Ignition Switch  - Refer to Ignition Switch and Key Lock Cylinder in STEERING SYSTEM
  4. Clutch Pedal Position Switch  - If equipped with manual transmission, refer to SWITCH-CLUTCH PEDAL POSITION .
  5. Park/Neutral Position Switch  - If equipped with automatic transmission, refer to 42RLE - SERVICE INFORMATION article .
  6. Wire harnesses and connections  - Refer to SYSTEM WIRING DIAGRAMS .
scientia non olet · About LEMON Manuals